044 - 2625 2499
 
+91 - 98840 44631
 
our products
AUTO CAP INDUSTRIES manufacture a wide variety of Gate, Globe , Check Valves & Ball valves in Bolted bonnet and pressure-seal design. The valves are approved by International majors in POWER, OIL & GAS and an ideal choice for reliable performance in critical applications.
Valves are available in ASME classes from 150 to 1500 . The valves conform to ANSI B16.34 and are offered with fully hard-faced seats in carbon steel, stainless steel and alloy steel.
 
Gate Valve
   
FLANGED END GATE VALVE
 
3” ‐ 300# GATE VALVE
 
GATE VALVE EXTENDED BODY
 
 
Salient Features:
Pressure seal body-bonnet joint – ensures tight body-bonnet seal and takes care of high pressure
Parallel-slide gate with disc-springs ensures
   
  • Better sealing
  •    
  • Lower operating torque
  •    
  • Minimises possibility of disc jamming
  • Fully hard-faced trim - Disc, seat-rings and back-seat hard-faced for longer service life
    Welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.Applicable for valves above 2”
    Valves available in intermediate pressure classes to meet specific customer needs
     
    SL.
    DESC.
    QTY.
    MATL.
    1
    BODY
    1
    ASTM A105
    2
    SEAT RING
    2
    ASTM 276-410
    3
    WEDGE
    1
    ASTM A217-CA15
    4
    STEM
    1
    ASTM 276-410
    5
    GASKET
    1
    SP.WND SS316 + GRAPHITE
    6
    BONNET
    1
    ASTM A105
    7
    BONNET BOLT
    4
    ASTM A193 Gr.B7
    8
    PACKING
    MIN 6
    GRAPHITE
    9
    GLAND BUSH
    1
    ASTM 276-410
    10
    STUD NUT
    4
    ASTM A194 Gr.2H
    11
    YOKE SLEEVE
    1
    ASTM A582 GR 416
    12
    HAND WHEEL
    1
    FABRICATED / SHEET METAL / MALLEABLE IRON
    13
    GLAND FLANGE
    1
    ASTM A105
    14
    STUD / EYE BOLT
    2
    ASTM A276-410
     
    DESIGN STD. (½” ‐ 2”)
    DESIGN STD. (2” ‐ 12”)
    API 602,ISO 15761, ASME B16.34
    API 600
    TESTING STD
    API 598, ISO 12266‐1
    END CONNECTION (½”‐ 2”) ASME B16.11
    FLANGED ENDS (½” ‐ 12”) ASME B16.5
    BUTT WELD ASME B16.25, API 602
    WORKING PRESSURE ASME B16.34
    FACE TO FACE MANUFACTURER STD / ASME B16.10
     
    Materials, Sizes, Class
    CARBON STEEL
    A105, LF2, WCB
    STAINLESS STEEL
    F304, F304L, F316, F316L, F304H,
    F316H, F321, F347, CF3, CF8, CF8M
    ALLOY STEEL
    F11, F22, F9, F5, F91
    SPECIAL MATERIAL
    DUPLEX
    SIZES
    ½” to 12''
    CLASS
    150, 300, 600, 800 & 1500
    END CONNECTION
    SOCKET WELD
    SCREWED (NPTF & BSP)
    SOCKET WELD x SCREWED
    END CONNECTION BUTT WELD (SCH.40, 80, 160 & XXS)
    FLANGED END
    REINFORCED EXTENDED BODY
    PLAIN EXTENDED BODY
    Globe Valve
     
    FLANGED END GLOBE VALVE
     
    3” ‐ 150# GLOBE VALVE
     
     
    Salient Features:
    Pressure seal body-bonnet joint – ensures tight body-bonnet seal and takes care of high pressure
    Parallel-slide gate with disc-springs ensures
       
  • Better sealing
  •    
  • Lower operating torque
  •    
  • Minimises possibility of disc jamming
  • Fully hard-faced trim - Disc, seat-rings and back-seat hard-faced for longer service life
    Welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration.Applicable for valves above 2”
    Valves available in intermediate pressure classes to meet specific customer needs
     
    SL.
    DESC.
    QTY.
    MATL.
    1
    BODY
    1
    ASTM A182 Gr.F304
    2
    SEAT RING
    2
    ASTM A276-304
    3
    DISC
    1
    ASTM A351 Gr.CF8
    4
    STEM
    1
    ASTM 276-304
    5
    GASKET
    1
    SP.WND SS316 + GRAPHITE
    6
    BONNET
    1
    ASTM A182 Gr.F304
    7
    BONNET BOLT
    4
    ASTM A193 Gr.B8
    8
    PACKING
    MIN 6
    GRAPHITE
    9
    GLAND BUSH
    1
    ASTM 276-304
    10
    STUD NUT
    4
    ASTM A194 Gr.8
    11
    YOKE NUT
    ASTM A582 GR 416
    12
    HAND WHEEL
    1
    FABRICATED / SHEET METAL / MALLEABLE IRON
    13
    GLAND FLANGE
    1
    ASTM A182 Gr.F304
    14
    STUD / EYE BOLT
    2
    ASTM A276-304
     
    DESIGN STD. (½” ‐ 2”)
    DESIGN STD. (2” ‐ 12”)
    API 602,ISO 15761, ASME B16.34
    BS 1873
    TESTING STD
    API 598, ISO 12266-1
    END CONNECTION (½”‐ 2”) ASME B16.11
    FLANGED ENDS (½” ‐ 12”) ASME B16.5
    BUTT WELD ASME B16.25, API 602
    WORKING PRESSURE ASME B16.34
    FACE TO FACE MANUFACTURER STD / ASME B16.10
     
    Materials, Sizes, Class
    CARBON STEEL
    A105, LF2, WCB
    STAINLESS STEEL
    F304, F304L, F316, F316L, F304H,
    F316H, F321, F347, CF3, CF8, CF8M
    ALLOY STEEL
    F11, F22, F9, F5, F91
    SPECIAL MATERIAL
    DUPLEX
    SIZES
    ½” to 12''
    CLASS
    150, 300, 600, 800 & 1500
    END CONNECTION
    SOCKET WELD
    SCREWED (NPTF & BSP)
    SOCKET WELD x SCREWED
    END CONNECTION BUTT WELD (SCH.40, 80, 160 & XXS)
    FLANGED END
    REINFORCED EXTENDED BODY
    PLAIN EXTENDED BODY
    Lift Check Valve
       
    FLANGED END CHECKVALVE
     
    LIFT CHECK VALVE
     
    4” ‐ 150# SWING CHECK VALVE
     
     
    Salient Features:
    Pressure seal body-cover joint - Line pressure is used to create a tight body-bonnet seal. Higher the pressure, tighter the seal
    Fully hard-faced trim - Disc and seat-rings hard-faced for longer service life
    Welded seat ring - Eliminates leakage path between seat ring and body, does not loosen up due to temperature fluctuations or vibration
    Piston type disc for sizes below 2” , Swing-type disc for sizes above 2’’
     
    SL.
    DESC.
    QTY.
    MATL.
    1
    BODY
    1
    ASTM A182 Gr.F316
    2
    SEAT RING
    1
    ASTM 276 - 316
    3
    DISC
    1
    ASTM 276 - 316
    4
    SPRING
    1
    ASTM A313 – 316
    5
    COVER
    1
    ASTM A182 Gr.F316
    6
    GASKET
    1
    SP.WND SS316 + GRAPHITE
    7
    BONNET BOLT
    4
    ASTM A193 Gr.B8
     
    DESIGN STD. (½” ‐ 2”)
    DESIGN STD. (2” ‐ 12”)
    API 602,ISO 15761, ASME B16.34
    BS 1868
    TESTING STD
    API 598, ISO 12266-1
    END CONNECTION (½”‐ 2”) ASME B16.11
    FLANGED ENDS (½” ‐ 12”) ASME B16.5
    BUTT WELD ASME B16.25, API 602
    WORKING PRESSURE ASME B16.34
    FACE TO FACE MANUFACTURER STD / ASME B16.10
     
    Materials, Sizes, Class
    CARBON STEEL
    A105, LF2, WCB
    STAINLESS STEEL
    F304, F304L, F316, F316L, F304H,
    F316H, F321, F347, CF3, CF8, CF8M
    ALLOY STEEL
    F11, F22, F9, F5, F91
    SPECIAL MATERIAL
    DUPLEX
    SIZES
    ½” to 12''
    CLASS
    150, 300, 600, 800 & 1500
    END CONNECTION
    SOCKET WELD
    SCREWED (NPTF & BSP)
    SOCKET WELD x SCREWED
    END CONNECTION BUTT WELD (SCH.40, 80, 160 & XXS)
    FLANGED END
    REINFORCED EXTENDED BODY
    PLAIN EXTENDED BODY
    Ball Valve
       
    FLANGED END CHECKVALVE
     
    FORGED BALL VALVE
     
    4" BALL VALVE
             
           
    6" BALL VALVE - GEAR OPERATOR
           
     
     
    SL.
    DESC.
    QTY.
    MATL.
    1
    BODY
    1
    ASTM A216 Gr.WCB
    2
    END CONNECTOR
    2
    ASTM A216 Gr.WCB
    3
    SEAT RING
    1
    PTFE
    4
    BALL
    1
    ASTM A182 Gr.F6A
    5
    BODY SEAL
    1
    PTFE
    6
    LEVER
    1
    MILD STEEL
    7
    STEM
    1
    ASTM A276-410
    8
    LEVER NUT
    1
    MILD STEEL
    9
    STEM NUT
    1
    MILD STEEL
    10
    STUD / BOLT
    4
    ASTM A193 Gr.B7
    11
    STUD NUT
    4
    ASTM A194 Gr.2H
     
    DESIGN STD.
    API 6D, ISO 17292, ASME B16.34
    TESTING STD
    API 598, ISO 12266-1
    END CONNECTION ASME B16.11
    FLANGED ENDS ASME B16.5
    BUTT WELD ASME B16.25, API 602
    WORKING PRESSURE ASME B16.34
    FACE TO FACE MANUFACTURER STD / ASME B16.10
     
    Materials, Sizes, Class
    CARBON STEEL
    A105, LF2, WCB
    STAINLESS STEEL
    F304, F304L, F316, F316L, F304H,
    F316H, F321, F347, CF3, CF8, CF8M
    ALLOY STEEL
    F11, F22, F9, F5, F91
    SPECIAL MATERIAL
    DUPLEX
    SIZES
    ½” to 12''
    CLASS
    150, 300, 600, 800 & 1500
    END CONNECTION
    SOCKET WELD
    SCREWED (NPTF & BSP)
    SOCKET WELD x SCREWED
    END CONNECTION BUTT WELD (SCH.40, 80, 160 & XXS)
    FLANGED END
    REINFORCED EXTENDED BODY
    PLAIN EXTENDED BODY
    Automobile Components
    ADJUSTER ASSEMBLY
    ADVANCE PISTON
    BODY MACHINING
    CAM RING SCREW
     
    HOSEND
    LOCK STOP -FORD FIGO
    LOCK STOP- TATA
    PLLA PISTON
     
    PLUGER INSERT
    PUSH ROD
    ROTOR
    ROTOR-1
     
    SECONDARY PLUNGER
    STRUT PARKING BRAKE
    TAPPET
    VALVE COMPONENTS
     
    WEDGE
     
     
    S. No.
    Components
    Application
    Client
    1
    PUSH ROD Heavy Vehicles Brake Assembly  BRAKES INDIA 
    2
    TAPPET Tractor Brake BRAKES INDIA 
    3
    ADVANCE PISTON Fuel Injection Pumo DELPHI TVS
    4
    ADJUSTER ASSEMBLY Brake Drum MANDO
    5
    CAM RING SCREW
    Fuel Injection Pump
    DELHPI TVS
    6
    PLLA PISTON
    Fuel Injection Pump
    DELHPI TVS
    7
    BODY MACHINING
    Booster Assembly
    MANDO
    8
    ROTOR
    Rotary Pump
    DELPHI TVS
    9
    LOCK STOP
    Power Steering
    RANE TRW
    10
    HOSEND
    Brake Cable
    BRAKES INDIA
    11
    WEDGE
    Brake Assembly
    ASHOK LEYLAND
    12
    STRUT PARKING BRAKE
    Brake Assembly
    BRAKES INDIA
    13
    VALVE COMPONENTS    
    14
    SECONDARY PLUNGER
    Brake Assembly
    MANDO
     
     
     
     
     
    Infrastructure
     
    "TIG WELDING M/C
    Tig welding is used for stellite deposit on seatring, wedges, bonnet backseat welding and integral seatring for globe valves and check valves. Body‐bonnet welding and flange...
     
    "VALVE TESTING UNIT
    Autocap has two 4 station hydraulic valve test rig which can test 12 valves at a particular time. Testing Capacity ‐ 1000 valves per day. Pressure rating ‐ 150# ‐ 1500#.
    Read More....
     
    Read More....
     
    Home     |     About Us     |     Products     |     Infrastructure     |     Certification     |     Clients     |     Enquiry     |     Contact Us
    COPYRIGHT © AUTOCAP INDUSTRIES 2015